RC Hobby > Connectors

Genuine W.S. Deans 4-pin connectors.  Set of 2 deans 4-pin mating connectors. Heat-resistant housings & gold-plated contacts. Set = 2 connector...

JR-SPEkTRUM-HiTEC-AIRTRONIC Z Female Connector with 3-color (orange, red, brown) 12" wire leads. You can plug your battery packs & servos INTO ...

Ultra T connector set - 1 male & 1 female.  2 connectors total.  Battery end and Motor/Charger end.  For high-amp R/C hobby applications, or an...

Ultra T Connector - Male end.  This is the Motor-Charger end. Red color Ultra T style connector, for high-amp R/C hobby applications, or any applic...

Set of 2 (1 red & 1 black) Alligator Clips with 4mm bullet connector jacks. Can connect with crimp/solder on one arm, or by plugging into 4mm j...

Futaba J male RC battery connector with 20AWG heavy-duty multi-strand wire with silicone insulation. Exclusively from BATTERIES AMERICA. Superior q...

Double-ended 36" R/C servo extension with 3-color 22-gauge wire.Choose connector Brand-color: (1) Futaba J style, (Connector has lip down one side;...

SPEkF-JRM: Adapter to convert SPEkTRUM white connector to JR male connector. Handy for converting battery packs with the SPEkTRUM white "A" connect...

Micro JST female connector with wire leads. This end plugs INTO a small 1S battery. Also known as Micro JST female 1.25mm, JST Micro female 1.25 PH...

Futaba Dual-Link Y Adapter. For RC on-board applications. This is a Futaba-style J-Series Dual Heavy Duty Extension; This extension comes from the ...

Futaba Splitter Adapter. Plug your battery into the Futaba Female connector, use the short Male end to plug into Transmitter or receiver, and use t...

DM-EC3M-6: adapter to convert red "T" connector to EC3 battery end. Has 6" of heavy-gauge wire between connectors.  One end has red ultra "T" male ...

Adaptive connector for NT8JY (Futaba) battery packs. Enables an NT8JY battery to be directly hooked up to a stand-alone charger or similar applicat...

Taranis Charging Connector: Use this Charging connector when you are smart-charging your Taranis transmitter battery externally. Add Banana Plugs t...

Deans brand Red micro polarized connector set: Set = 2 pcs. These are RED color Deans-style 2-pin connectors, with heat-resistant housings. Pieces ...

Male RC connector - for JR-PROPO, HiTEC, & new Airtronics Z R/C. Comes with 12" of 3-color wire leads (22-gauge). Goes on Receiver battery pa...

XT60F-EC3M: adapter to convert XT60 battery to EC3 battery connector

DM-EC3B: adapter to convert red "T" connector to EC3 battery end. One end has red ultra "T" male connector; other end has EC3 (blue) battery connec...

MX2.0-2P-JSTRM: adapter for RC batteries & chargers. One end is MX2.0-2P white flat female connector, other end is JST red male connector. Good...

Futaba-style white 2-pin connector with long 10" wire leads - goes on flat (side-by-side) transmitter batteries for Conquest 4, Skysport 4, Attack,...

TAMIYA Battery-end Connector Kit. Includes housing + 2 metal bullet pins. Crimping will be required to affix a wire to the pin. This battery end i...

XT30 motor / charging connectors. Sold individually.  You would plug a battery pack INTO this connector. These are substantially smaller than the X...

XT30 battery connectors. Sold individually. This connector goes on a battery pack.

Banana Plugs. Set of 2. Can be soldered onto, OR you can use the installed screws to mechanically attach wires inside the plugs. For DC purposes, R...

Airtronics Switch Harness. Connectors are Original Airtronics style (center position NEG(-). Goes between battery and receiver. LIMITED QTY.

Ultra T Connector - Battery end. Red color Ultra T style connector, for high-amp R/C hobby applications, or any application requiring a sure, solid...

Double-ended 48" long R/C servo extension with 3-color 22-gauge wire. Choose connector Brand-color:(1) Futaba J style (connector has lip down one s...

Set of 2 alligator clips (1 red and 1 black). Approximately 1 3/8" long. Crimp or solder onto lead arms.

Gold Battery Bars : 10 pcs of gold-plated battery bars, used for linking A & AA-size battery cells.  Approximately 1 3/8" long, 5/16" wide.  De...

Ultra Series Connector - combines 2 battery packs with red T connector and DOUBLES the voltage Output.

DM-BA: Red T male connector to Banana Plugs. Approx. 8" long. Use for attaching Battery Packs with Red "T" ultra connector to a charger.

KYOSHO connector set for RC. Consists of 1 Kyosho battery end & 1 Kyosho motor end (with wire leads on each). Choose set quantity desired.

9v Snap Connector Adaptor to TAMIYA Female. Adapter for batteries with 9-volt snap connector (like the NT-8ib) to link to Chargers (such as YT-0006...

10 JST Male & 10 JST Female connectors with wire leads

SWH6272: HD Charge Switch for 7.4v Li-PO, 7.4v Li-ION, 6.6v Li-FE. Has universal connectors to fit Futaba, JR, SPEkTRUM, HiTEC, Airtronics Z, deans.

EC3 Blue battery connector, pre-wired with 8" of heavy 13-gauge red & black wires.

XT60 battery end with heavy-gauge wire leads

# JR-SPEkFBP-20 : JR-SPEkTRUM-HiTEC charging adapter with heavy-duty 20AWG wire & banana plugs (aka 4,, bullet connectors). Has JR-SPEkTRUM-HiT...